Online course
Advanced EXOCAD for all things AOX (EXOCAD AOX)
by Dr.Nate Farley, Brandon Howell
- Nate Farley
Brandon Howell - 16 lessons
- Duration:
10 h 50 min - Access to the course is not limited in time
Course program
Advanced EXOCAD for all things AOX (EXOCAD AOX)
16 online lessons
This course aims to expose you to multiple AOX workflows. We'll start with an easy case, but will quickly find ourselves in the weeds of full arch EXOCAD!!
Course Outline:
1) Standard AOX
2) More challenging AOX
3) FP1 arch
4) Copy Design (from a scanned setup)
5) Predesign (preparing for surgery)
6) Immediate Design - iMetric
7) Immediate Design - MicronMapper
8) Final Design - OptiSplint
9) Final Design - Tupel/Grammy
10) Blender Bar Module
and all the tips and tricks in between!
Course Objectives:
1) Understand the basics behind AOX design in EXOCAD
2) Transition from traditional AOX design into FP1 (crown and bridge) designs
3) Learn to maneuver the world of photogrammetry and grammetry, both at surgery and going into finals
4) Preparing the files for surgery, where you will be able to design 90% of the prosthesis before surgery...and what to do right after surgery
5) Use Blender to take a monolithic design and turn it into a bar and sleeve design
We know the learning curve is steep enough just to understand EXOCAD, but it's a firehose of information getting proficient in all of the various methods currently on the market for AOX. This course aims to get you going on the journey with a multitude of tools for success. THIS IS AN ADVANCED COURSE!! Please be sure you have used EXOCAD already and it would be best if you've at least designed some AOX arches.
16 online lessons
This course aims to expose you to multiple AOX workflows. We'll start with an easy case, but will quickly find ourselves in the weeds of full arch EXOCAD!!
Course Outline:
1) Standard AOX
2) More challenging AOX
3) FP1 arch
4) Copy Design (from a scanned setup)
5) Predesign (preparing for surgery)
6) Immediate Design - iMetric
7) Immediate Design - MicronMapper
8) Final Design - OptiSplint
9) Final Design - Tupel/Grammy
10) Blender Bar Module
and all the tips and tricks in between!
Course Objectives:
1) Understand the basics behind AOX design in EXOCAD
2) Transition from traditional AOX design into FP1 (crown and bridge) designs
3) Learn to maneuver the world of photogrammetry and grammetry, both at surgery and going into finals
4) Preparing the files for surgery, where you will be able to design 90% of the prosthesis before surgery...and what to do right after surgery
5) Use Blender to take a monolithic design and turn it into a bar and sleeve design
We know the learning curve is steep enough just to understand EXOCAD, but it's a firehose of information getting proficient in all of the various methods currently on the market for AOX. This course aims to get you going on the journey with a multitude of tools for success. THIS IS AN ADVANCED COURSE!! Please be sure you have used EXOCAD already and it would be best if you've at least designed some AOX arches.
1.Welcome
21 min 56 sec
2.Design Concepts and Libraries
20 min 39 sec
3.Standard AOX Design
2 h 4 min 51 sec
4.More Challenging AOX Design
1 h 11 min 3 sec
5.How FP1s Differ Clinically and in the Design
9 min 39 sec
6.FP1 Design
58 min 43 sec
7.Copy Design
24 min 30 sec
8.Blender iBar Bar_Sleeve
10 sec
9.PhotogrammetryGrammetry_MUA Direct Screws
28 min 11 sec
10.Predesign the design before surgery
1 h 2 min 18 sec
11.Immediate Design OptiSplint
35 min 23 sec
12.Immediate Design MicronMapper
15 min 24 sec
13.Final Design TupelGrammee
10 min 34 sec
14.Final Design iMetric
17 min 41 sec
15.Final Design iMetric XML Method
56 min 57 sec
16.More About Us. What We Can Do For You
1 h 25 min
- 16lessons
- -94%discount
- $471savings
The full course program
1.Welcome
Here you can watch a five-minute fragment of the lesson.
Duration: 21 min 56 sec
2.Design Concepts and Libraries
Here you can watch a five-minute fragment of the lesson.
Duration: 20 min 39 sec
3.Standard AOX Design
Here you can watch a five-minute fragment of the lesson.
Duration: 2 h 4 min 51 sec
4.More Challenging AOX Design
Here you can watch a five-minute fragment of the lesson.
Duration: 1 h 11 min 3 sec
5.How FP1s Differ Clinically and in the Design
Here you can watch a five-minute fragment of the lesson.
Duration: 9 min 39 sec
6.FP1 Design
Here you can watch a five-minute fragment of the lesson.
Duration: 58 min 43 sec
7.Copy Design
Here you can watch a five-minute fragment of the lesson.
Duration: 24 min 30 sec
8.Blender iBar Bar_Sleeve
Here you can watch a fragment of the lesson.
Duration: 10 sec
9.PhotogrammetryGrammetry_MUA Direct Screws
Here you can watch a five-minute fragment of the lesson.
Duration: 28 min 11 sec
10.Predesign the design before surgery
Here you can watch a five-minute fragment of the lesson.
Duration: 1 h 2 min 18
11.Immediate Design OptiSplint
Here you can watch a five-minute fragment of the lesson.
Duration: 35 min 23 sec
12.Immediate Design MicronMapper
Here you can watch a five-minute fragment of the lesson.
Duration: 15 min 24 sec
13.Final Design TupelGrammee
Here you can watch a five-minute fragment of the lesson.
Duration: 10 min 34 sec
14.Final Design iMetric
Here you can watch a five-minute fragment of the lesson.
Duration: 17 min 41 sec
15.Final Design iMetric XML Method
Here you can watch a five-minute fragment of the lesson.
Duration: 56 min 57 sec
16.More About Us. What We Can Do For You
Here you can watch a five-minute fragment of the lesson.
Duration: 1 h 25 min
Special offer
Nate Farley
Brandon Howell
Advanced EXOCAD for all things AOX (EXOCAD AOX)
16 lessons • 10 h 50 min
Access to the course is unlimited in time!
Brandon Howell
Advanced EXOCAD for all things AOX (EXOCAD AOX)
16 lessons • 10 h 50 min
Access to the course is unlimited in time!
Nate Farley
Dr
Dr
Nate Farley is a board certified prosthodontist with a passion for all things digital. He completed both dental school and his prosthodontic residency at the Ohio State University.
While in residency, he created whatimplantisthat.com, a free online resource for radiographic implant identification. This passion for dental information led him to co-found Infodontics, LLC, a company committed to put dental information right at people’s fingertips through innovative, useful, and free online resources. Also in residency, he completed his masters thesis by comparing the accuracy of CAD/CAM surgical guides to traditional guides. Over the years, he has had experience with five different implant planning programs.
While in residency, he created whatimplantisthat.com, a free online resource for radiographic implant identification. This passion for dental information led him to co-found Infodontics, LLC, a company committed to put dental information right at people’s fingertips through innovative, useful, and free online resources. Also in residency, he completed his masters thesis by comparing the accuracy of CAD/CAM surgical guides to traditional guides. Over the years, he has had experience with five different implant planning programs.
Brandon Howell
Lab manager
Lab manager
Brandon Howell is Lab Manager and is responsible for all the in-house design and fabrication for Revive's patients as well as some other dentists and labs.
Brandon has incredible attention to detail, is incredibly artistic, and is considered an expert in full arch Exocad design.
Brandon has incredible attention to detail, is incredibly artistic, and is considered an expert in full arch Exocad design.