Online course
Full-arch rehabilitation. Implantation and prosthetics
by Giacomo Fabbri, Enrico Agliardi, Francesco Mintrone, Marco Degidi
- Giacomo Fabbri, Enrico Agliardi, Francesco Mintrone, Marco Degidi
- 12
lessons - Duration:
14 hours 43 minutes - Access to the course is not limited in time
Course program
12 online lectures
Full-arch rehabilitation. Implantation and prosthetics
What are the main risks that lead to failure in mucogingival and peri-implant surgery?
Prof. Giovanni Zucchelli and Dr. Martina Stefanini welcome you to Success and Failure in Periodontal and Peri-Implant Soft Tissue Surgery, the course dedicated entirely to the prevention and management of pre-, intra- and postoperative complications in the treatment of gingival recessions as well as in immediate and delayed implant placement.
The specialists present and describe the different risk factors underlying surgical failure through a combination of theoretical lectures, clinical cases and a hands-on video, and analyze the errors that may occur during the diagnostic, surgical, maintenance, and follow-up phases.
Full-arch rehabilitation. Implantation and prosthetics
What are the main risks that lead to failure in mucogingival and peri-implant surgery?
Prof. Giovanni Zucchelli and Dr. Martina Stefanini welcome you to Success and Failure in Periodontal and Peri-Implant Soft Tissue Surgery, the course dedicated entirely to the prevention and management of pre-, intra- and postoperative complications in the treatment of gingival recessions as well as in immediate and delayed implant placement.
The specialists present and describe the different risk factors underlying surgical failure through a combination of theoretical lectures, clinical cases and a hands-on video, and analyze the errors that may occur during the diagnostic, surgical, maintenance, and follow-up phases.
Lecture 1: Tilted implants. Immediate rehabilitation of atrophic jaws in compromised patients
1 h 12 min
Lecture 2: Rehabilitation of atrophic jaws with tilted implants
1 h 12 min
Lecture 3: Aesthetic analysis and planning of rehabilitation of complete adentia
1 h 03 min
Lecture 4: The concept of the free edge of the gum: when do you need pink ceramics?
0 h 44 min
Lecture 5: Digital and traditional approaches: selection criteria
1 h 02 min
Lecture 6: Prosthetic frame design
0 h 52 min
Lecture 7: Occlusion in the treatment of edentulous patients
2 h 21 min
Lecture 8: Treatment planning of full edentulous patients
1 h 07 min
Lecture 9: Choosing a prosthetic strategy
1 h 10 min
Lecture 10: Materials and the long term maintenance
1 h 16 min
Lecture 11: Full arches Immediate loading with the intra oral welding technique
1 h 17 min
Lecture 12: The conometric concept in implant prosthetic: no screw no glue implant restorations
1 h 20 min
- 12lessons
- -96%discount
- $493savings
The full course program
Lecture 1:
Tilted implants. Immediate rehabilitation of atrophic jaws in compromised patients
Tilted implants. Immediate rehabilitation of atrophic jaws in compromised patients
Here you can watch a five-minute fragment of the lesson.
Program
– Treatment planning and algorithm
– Bone quantity and quality: factors
– Rehabilitation options for complete edentulism: justification of the choice
– All-op-4®: advantages of the method
– Advantages of extra-long implants
– Maxillary atrophy: treatment options
– Atrophy of the lower jaw: analysis of a complex clinical case
– All-on-4® in case of unsuccessful implantological treatment
– Rehabilitation V-II-V: indications and techniques
– Prosthesis manufacturing: laboratory stage
– Trans sinus placement of implants
– Zygomatic implants: indications
– Double zygomatic implants.
Recommended for: Prosthodontists, Implantologists.
– Treatment planning and algorithm
– Bone quantity and quality: factors
– Rehabilitation options for complete edentulism: justification of the choice
– All-op-4®: advantages of the method
– Advantages of extra-long implants
– Maxillary atrophy: treatment options
– Atrophy of the lower jaw: analysis of a complex clinical case
– All-on-4® in case of unsuccessful implantological treatment
– Rehabilitation V-II-V: indications and techniques
– Prosthesis manufacturing: laboratory stage
– Trans sinus placement of implants
– Zygomatic implants: indications
– Double zygomatic implants.
Recommended for: Prosthodontists, Implantologists.
Lecture 2:
Rehabilitation of atrophic jaws with tilted implants
Rehabilitation of atrophic jaws with tilted implants
Here you can watch a five-minute fragment of the lesson.
Program
– Innovative drilling protocol:
- Osseodirector™
- Osseoshaper™.
– Tri-oval implant design: mechanical and biological advantages
– The method of installing the NobelBiocare N1 implant
– The use of NobelBiocare N1 in a complex clinical situation.
Recommended for: Prosthodontists, Implantologists.
– Innovative drilling protocol:
- Osseodirector™
- Osseoshaper™.
– Tri-oval implant design: mechanical and biological advantages
– The method of installing the NobelBiocare N1 implant
– The use of NobelBiocare N1 in a complex clinical situation.
Recommended for: Prosthodontists, Implantologists.
Lecture 3:
Aesthetic analysis and planning of rehabilitation of complete adentia
Aesthetic analysis and planning of rehabilitation of complete adentia
Here you can watch a five-minute fragment of the lesson.
Program
– Aesthetic rehabilitation: the stages of creating a beautiful smile:
- Facial analysis
- Dental-labial analysis
- Dental analysis.
– Determination of the centric relation
– Angle of inclination of the occlusal plane: value
– Determination of the occlusal plane: methodology
– Vertical dimention of occlusion: value
– Creating a surgical template
– The concept of a digital approach to work.
Recommended for: Prosthodontists, Implantologists.
– Aesthetic rehabilitation: the stages of creating a beautiful smile:
- Facial analysis
- Dental-labial analysis
- Dental analysis.
– Determination of the centric relation
– Angle of inclination of the occlusal plane: value
– Determination of the occlusal plane: methodology
– Vertical dimention of occlusion: value
– Creating a surgical template
– The concept of a digital approach to work.
Recommended for: Prosthodontists, Implantologists.
Lecture 4:
The concept of the free edge of the gum: when do you need pink ceramics?
The concept of the free edge of the gum: when do you need pink ceramics?
Here you can watch a five-minute fragment of the lesson.
Program
– Complete edentulism: an analysis of the clinical situation
– Creating a radiopaque template
– Guided bone regeneration: indications
– Maxilla rehabilitation: demonstration of the technique
– Digital approach in rehabilitation: a clinical example
– The method of obtaining an accurate impression.
Recommended for: Prosthodontists, Implantologists.
– Complete edentulism: an analysis of the clinical situation
– Creating a radiopaque template
– Guided bone regeneration: indications
– Maxilla rehabilitation: demonstration of the technique
– Digital approach in rehabilitation: a clinical example
– The method of obtaining an accurate impression.
Recommended for: Prosthodontists, Implantologists.
Lecture 5:
Digital and traditional approaches: selection criteria
Digital and traditional approaches: selection criteria
Here you can watch a five-minute fragment of the lesson.
Program
– Aesthetic analysis with complete edentulism
– Bite registration: application of the facial bow
– Zygomatic implants: indications and methods
– Temporary orthopedic structures
– Digital impression: the method of obtaining
– Face scanning: creating a virtual patient
– Occlusal plane: the technique of ideal positioning
– Sheffield Test: technique
– Zirconium frame: аdvantages
– Monolithic and lined crowns: comparison
– X-ray contrast template
– Complete rehabilitation in case of unsuccessful prosthetics restorations
– Anatomy of orthopedic units.
Recommended for: Prosthodontists, Implantologists.
– Aesthetic analysis with complete edentulism
– Bite registration: application of the facial bow
– Zygomatic implants: indications and methods
– Temporary orthopedic structures
– Digital impression: the method of obtaining
– Face scanning: creating a virtual patient
– Occlusal plane: the technique of ideal positioning
– Sheffield Test: technique
– Zirconium frame: аdvantages
– Monolithic and lined crowns: comparison
– X-ray contrast template
– Complete rehabilitation in case of unsuccessful prosthetics restorations
– Anatomy of orthopedic units.
Recommended for: Prosthodontists, Implantologists.
Lecture 6:
Prosthetic frame design
Prosthetic frame design
Here you can watch a five-minute fragment of the lesson.
Program
– Materials for prosthetics restorations
– Zirconium dioxide: properties and advantages
– Monolithic and layered approaches: advantages and disadvantages
– Biological integration: material selection
– The concept of a single abutment
– Methods of cleaning the prosthetics restorations
– Correction of occlusive contacts: tools
– Rehabilitation of a patient with complete adentia: a clinical example.
Recommended for: Prosthodontists, Implantologists.
– Materials for prosthetics restorations
– Zirconium dioxide: properties and advantages
– Monolithic and layered approaches: advantages and disadvantages
– Biological integration: material selection
– The concept of a single abutment
– Methods of cleaning the prosthetics restorations
– Correction of occlusive contacts: tools
– Rehabilitation of a patient with complete adentia: a clinical example.
Recommended for: Prosthodontists, Implantologists.
Lecture 7:
Occlusion in the treatment of edentulous patients
Occlusion in the treatment of edentulous patients
Here you can watch a five-minute fragment of the lesson.
Program
– Analysis of facial features in the treatment of edentulous patients
– Incisal edge position
– Examination of edentulous patient: necessary data
– The flapless surgical approach: advantages and disadvantages
– Impressions: plaster or digital technologies
– Occlusal concept: principles
– Types of centric holding contacts
– Vertical dimension of occlusion: clinical criteria
– Indications for increasing the vertical dimension of occlusion
– Definition of centric relation.
Recommended for: Prosthodontists, Implantologists.
– Analysis of facial features in the treatment of edentulous patients
– Incisal edge position
– Examination of edentulous patient: necessary data
– The flapless surgical approach: advantages and disadvantages
– Impressions: plaster or digital technologies
– Occlusal concept: principles
– Types of centric holding contacts
– Vertical dimension of occlusion: clinical criteria
– Indications for increasing the vertical dimension of occlusion
– Definition of centric relation.
Recommended for: Prosthodontists, Implantologists.
Lecture 8:
Treatment planning of full edentulous patients
Treatment planning of full edentulous patients
Here you can watch a five-minute fragment of the lesson.
Program
– Planning, treatment and maintaining: 3 stages of rehabilitation
– Horizontal disharmony: inter-incisal vertical midline and occlusal plane
– Prosthetic aspects after surgery: mistakes at the stage of temporary prosthetics
– Principles of determining the type of restoration
– Aesthetic and phonetic analysis
– Pontic area: design options
– Hybrid bridge: advantages
– Reversible and irreversible stages of rehabilitation
– Determining the number of implants.
Recommended for: Prosthodontists, Implantologists.
– Planning, treatment and maintaining: 3 stages of rehabilitation
– Horizontal disharmony: inter-incisal vertical midline and occlusal plane
– Prosthetic aspects after surgery: mistakes at the stage of temporary prosthetics
– Principles of determining the type of restoration
– Aesthetic and phonetic analysis
– Pontic area: design options
– Hybrid bridge: advantages
– Reversible and irreversible stages of rehabilitation
– Determining the number of implants.
Recommended for: Prosthodontists, Implantologists.
Lecture 9:
Choosing a prosthetic strategy
Choosing a prosthetic strategy
Here you can watch a five-minute fragment of the lesson.
Program
– Stages of rehabilitation:
- Phase A: Implantation and temporary prosthetics
- Phase B: Final rehabilitation.
– Number of implants: features of choice for the upper and lower jaw
– Submerged implants and temporary removable prostheses: clinical tips
– Strategies for temporary prosthetics
– Full-acrylic restorations: advantages and disadvantages
– Temporary prosthetics with immediate loading: a technique
– Design and material of the prosthetics: in vitro research
– Metal frame: manufacturing, advantages and disadvantages
– Intermediate abutments
– Biological width and bone remodeling: stability factors
– Tilted implants: prosthitic aspects
– Biomechanical and biological aspects of implant-bone contact.
Recommended for: Prosthodontists, Implantologists.
– Stages of rehabilitation:
- Phase A: Implantation and temporary prosthetics
- Phase B: Final rehabilitation.
– Number of implants: features of choice for the upper and lower jaw
– Submerged implants and temporary removable prostheses: clinical tips
– Strategies for temporary prosthetics
– Full-acrylic restorations: advantages and disadvantages
– Temporary prosthetics with immediate loading: a technique
– Design and material of the prosthetics: in vitro research
– Metal frame: manufacturing, advantages and disadvantages
– Intermediate abutments
– Biological width and bone remodeling: stability factors
– Tilted implants: prosthitic aspects
– Biomechanical and biological aspects of implant-bone contact.
Recommended for: Prosthodontists, Implantologists.
Lecture 10:
Materials and the long term maintenance
Materials and the long term maintenance
Here you can watch a five-minute fragment of the lesson.
Program
– The correct impression:
- The technique for the manufacture of a hybrid bridge
- Methodology for the manufacture of the bridge.
– Combination of zirconium frame and lithium disilicate
– Features of the frame design: anatomical and prosthetic
– Advantages of the combined approach
– Major and minor chipping: tactics
– Titanium and zirconium frame: differences in operation
– Hygiene maintenance.
Recommended for: Prosthodontists, Implantologists.
– The correct impression:
- The technique for the manufacture of a hybrid bridge
- Methodology for the manufacture of the bridge.
– Combination of zirconium frame and lithium disilicate
– Features of the frame design: anatomical and prosthetic
– Advantages of the combined approach
– Major and minor chipping: tactics
– Titanium and zirconium frame: differences in operation
– Hygiene maintenance.
Recommended for: Prosthodontists, Implantologists.
Lecture 11:
Full arches Immediate loading with the intra oral welding technique
Full arches Immediate loading with the intra oral welding technique
Here you can watch a five-minute fragment of the lesson.
Program
– The Well done™ concept: advantages and principles
– Electric welding in the oral cavity: the principle of operation of the equipment
– Tools and materials for intraoral welding:
- Abutments
- Wire
- Bending tools
- Welding Unit
- Pro-shell.
– The methodology of working with the WeldOne™ device
– Manufacturing of lunular and hybrid bridges: analog and digital approach
– Making a frame in the oral cavity: demonstration of the technique
– Guided welding approach
– Rehabilitation in conditions of lack of bone tissue: clinical examples.
Recommended for: Prosthodontists, Implantologists.
– The Well done™ concept: advantages and principles
– Electric welding in the oral cavity: the principle of operation of the equipment
– Tools and materials for intraoral welding:
- Abutments
- Wire
- Bending tools
- Welding Unit
- Pro-shell.
– The methodology of working with the WeldOne™ device
– Manufacturing of lunular and hybrid bridges: analog and digital approach
– Making a frame in the oral cavity: demonstration of the technique
– Guided welding approach
– Rehabilitation in conditions of lack of bone tissue: clinical examples.
Recommended for: Prosthodontists, Implantologists.
Lecture 12:
The conometric concept in implant prosthetic: no screw no glue implant restorations
The conometric concept in implant prosthetic: no screw no glue implant restorations
Here you can watch a five-minute fragment of the lesson.
Program
– Advantages of the conometric concept
– Requirements for conometric restoration
– Production of the frame by intraoral welding: methodology
– Rehabilitation in the conometric concept:
- With complete edentulism
- With partial edentulism
- If one tooth is missing.
– Maintenance.
Recommended for: Prosthodontists, Implantologists.
– Advantages of the conometric concept
– Requirements for conometric restoration
– Production of the frame by intraoral welding: methodology
– Rehabilitation in the conometric concept:
- With complete edentulism
- With partial edentulism
- If one tooth is missing.
– Maintenance.
Recommended for: Prosthodontists, Implantologists.
- Giacomo FabbriGraduated with honours in dentistry and dental prosthodontics at the University of Pavia.
An active member of the Italian Academy of Prosthetic Dentistry (A.I.O.P), a prestigious scientific Academy in the field of esthetic and prosthetic dentistry.
Has published several international articles in peer-reviewed journals and lectured in Italy and abroad on topics related to fixed prosthodontics and implant prosthodontics with specific interest on esthetics, new materials and minimally invasive approach.
Works in Ban Mancini Fabbri Specialist Dental Practice, located in Cattolica (Italy), in the field of esthetics and prosthetic rehabilitation on natural teeth and implants. - Enrico AgliardiProfessor. Associate Professor of odontostomatological diseases. Chair of Maxillofacial and Special Rehabilitation Surgery Master's degree course in Dentistry and CLOPD Dental Prosthesis Vita-Salute San Raffaele University of Milan. Director of the dentistry department of the Resnati clinic (Punto RAF), Smart Dental Clinic, San Donato Hospital Group, Milan. Author and co-author of several national and international publications and textbooks on advanced implantology.
- Francesco MintroneEAED active member. Winner of the 2011 and 2012 editions of the Master Clinician in Implant Dentistry at the gIDE/ UCLA. Faculty member and chairman at the gIDE/LLU for the Esthetic/Implant Master Program in Europe, China and Vietnam. He has authored several articles published on international scientific magazines and he lectures nationally and internationally on topics related to digital dentistry. implants and prosthodontics.
- Marco Degidi- Adjunct Professor, Postgraduate Master in Clinic Implantology at the University of Bologna.
- Active member of the Academy of Osseointegration, and a Diplomate of the International College of Oral Implantology.
- Inventor of the WeldOne Concept as well as the Conometric Concept.
- He has published 147 articles on Peer-reviewed Journals and received many awards; his H-INDEX is 35.
- He lectures worldwide in the fields of immediate loading, primary stability, biomaterials and aesthetic dentistry.
- He runs a private practice in Bologna, restricted to implant surgery & prosthetics.
Special offer
Giovanni Zucchelli, Martina Stefanini
Full-arch rehabilitation. Implantation and prosthetics
12 lessons • 14h 43min
Access to the course is unlimited in time!
Full-arch rehabilitation. Implantation and prosthetics
12 lessons • 14h 43min
Access to the course is unlimited in time!