Online course
Online school of orthopedic dentistry
by Maxim Belograd
- Maxim Belograd
- 13 modules: 20
lectures - Duration:
28 hours 7 minutes - Access to the course is not limited in time
Course program
13 modules: 20 online lectures
Online school of orthopedic dentistry
Online school of orthopedic dentistry
Module 1: Bonding of ceramic veneers. Step-by-step protocols
- Try-in utilizing try-in pastes
- Working with tight proximal contacts
- Bonding protocols for ceramic veneer
- Rubberdam isolation
- Try-in with rubberdam. What to pay attention to
- Tooth structures treatment fro proper bonding and avoiding sensitivity
- Veneer bonding using composite cement
- Finishing and polishing
Module 2: Adhesive systems. Review and clinical APPLICATION
- Adhesives for total etching.
- Self-etching systems.
- Universal adhesives.
- Clinical protocols
- Total etching. Step by step binding protocol.
- Selective etching. Step by step binding protocol.
Module 3: Bonding: Zirconia crowns and Ceramic over-lays + Isolation
- Bonding to zirconia and glass ceramic.
- Material selection: resin cements, bonding systems, ceramic and zirconia primers.
- Treatment of tooth surface.
- What to do if there is composite filling or IDS.
- Zirconia crown cementation: step-by-step.
- Bonding of ceramic overlay: step-by-step.
- Tips with rubberdam isolation for bonding procedures.
Module 4: Ceramic in-lays, over-lays and veneer lays. Preparation designs
- In-lay preparation. Indications and full process
- Cusp reduction. When and how.
- Over-lay preparation. Indications and full process
- Cavity design optimizing and immediate dentin sealing.
- Veneer-onlay preparation. Indications and full process
- Protocols of preparation and instruments to use.
Module 5: Veneers and class 3 caries defects. Clinical aspects of tooth preparation
- Preparation nuances related to proximal zones, opening contacts
- Tactics selection: to treat caries before preparation or to treat during process of preparation
- Rubberdam placement
- Initial stage of preparation and depth control utilizing silicon index
- Immediate dentin sealing and filling of undercuts. Bonding protocol
- Final step of preparation with rubberdam. Tips and tricks
Module 6: Complete guide in veneer preps. All types
- Window prep. Indications and full process
- Type 1. When we keep proximal contact
- Type 2. When we brake proximal contact
- Type 3. Prep through proximal zone
- Type 4. Incisal overlap. Old school or good option?
- How to prep if there are composite fillings.
- Diastema: to prep or not to prep.
- Detailed protocols of preparation and instruments to use.
Module 7: Direct posterior restorations
- Isolation and preparation
- Design of future restoration-tooth interface
- Bonding protocols: total etching and self etching
- Modeling of occlusal anatomy controlling possible occlusal adjustments
- Micro anatomy and using tints
- Stamp technique ("copy-paste")
Module 8: Impression and retraction techniques
- Preparing teeth for impression taking. Chlorhexidine
- Retraction. Single cord and double cord techniques. Retraction pastes
- Impression tray selection
- One step impression
- Two step impression
- Hybrid technique using plastic frame
- Results evaluation. Mistakes analysis
Module 9: Preparation for full crowns: Posteriors
- Silicone index for preparation control;
- Preparation for ceramic crowns(e.max);
- Preparation for zirconia crowns;
- Full protocol of reparation performing finish lines for posterior teeth;
- Ergonomics and tips working with mirror.
Module 10: RUBBERDAMology: basics, tips and tricks with isolation
- Clamp modification
- Basic and advanced equipment for isolation
- Split-dam overview for different tasks
- Classic protocols of isolation in operative dentistry
- How to prep teeth under the dam
Module 11: Veneers and caries defects class 4 and 5
- Getting silicone index and initial stage of preparation
- Complete opening of proximal zones in case of class 4 caries defect and determination of finish line placement in case of class 5
- Rubberdam placement
- Immediate dentin sealing and filling of undercuts. Bonding protocol
- Working with palatal silicone index in case when class 4 defect has bigger palatal involvement than from buccal side
- Final step of preparation with rubberdam. Tips and tricks
Module 12: Veneers and discoloration
- Ceramic systems review
- Communication with dental lab, discussing thickness of restoration to change the color
- Selection of type of ceramic considering color change
- Evaluation and planning of preparation volume
- Silicone keys to control reduction process
- Mockup, Initial preparation
- Features with proximal preparation. Soft tissues retraction
- Cervical finish line: where to localize and perform, Final preparation, Result evaluation
- Special add-on: Immediate dentin sealing. Clinical steps and protocols.
Module 13: Veneers on premolars and molars
- Step-by-step protocols of veneer preparations for posterior teeth
- Silicon indexes for posterior teeth
- Initial preparation, reduction control
- Veneer preparation - type 1 "Window"
- Veneer preparation - tupe 2 "Butt joint"
- Veneer preparation with occlusal overlaying - type 3 "Veneer-overlay"
- Final preparation
- 20lessons
- -96%discount
- $481savings
The full course program
Module 1: Bonding of ceramic veneers. Step-by-step protocols.
Here you can watch a five-minute fragment of the lesson.
During this online masterclass you will see full process of ceramic veneers bonding from try-in, isolation to polishing tooth/veneer interface.
Key moments:
Key moments:
- How to treat tooth structures for proper bonding
- Simple and predictable bonding protocol
- How to use rubberdam for bonding procedures
- Hot to avoid post operative sensitivity
Module 2: Adhesive systems. Review and clinical application.
Here you can watch a five-minute fragment of the lesson.
This webinar is about adhesive systems for enamel and dentin bonding as well as step by step protocols.
1 lesson.
1 lesson.
Module 3: Bonding: zirconia crowns and ceramic over-lays + isolation.
Here you can watch a five-minute fragment of the lesson.
This online workshop will guide you in bonding protocols of indirect restorations made of zirconia and glass ceramic. All procedures will be shown in precise details as well as bonding materials will be discussed.
Key moments:
Key moments:
- How to bond ceramic overlay
- Bonding to Zirconia
- Different types of resin cements
- Rubberdam isolation
- Bonding agents and primers
Module 4: Ceramic in-lays, over-lays and veneer lays. Preparation designs.
Here you can watch a five-minute fragment of the lesson.
This online workshop will give you guide in preparation for partial posterior restorations.
All preparation varieties will be shown in precise details as well as indications to each type will be explained.
Key moments:
All preparation varieties will be shown in precise details as well as indications to each type will be explained.
Key moments:
- Cusp reduction
- Indirect posterior restorations
- Cusp coverage
- Occlusal onlays
- Clinical situations
Module 5: Veneers and class 3 caries defects. Clinical aspects of tooth preparation.
Here you can watch a five-minute fragment of the lesson.
Detailed and specialized online master-class where tooth preparation for ceramic veneer considering class 3 caries defects will be shown step by step.
1 lesson.
1 lesson.
Module 6: Complete guide in veneer preps. All types.
Here you can watch a five-minute fragment of the lesson.
This online workshop will give you complete guide in veneer prep designs. All preparation varieties will be shown in precise details as well as indications to each type will be explained.
Key moments:
Key moments:
- Window prep. Protocols, instruments.
- Type 1 keeping contact
- Type 2 contact opening
- Type 3 prep through
- Type 4 incisal overlap
Module 7: Direct posterior restorations.
Here you can watch a five-minute fragment of the lesson.
During this online masterclass you will see practical and easy going techniques restoring occlusal surface utilizing composite resin materials as well as predictable bonding protocols.
Key moments:
Key moments:
- Avoid occlusal adjustments
- Restore occlusal surface in easy way
- Reproduce beautiful morphology
- Use proper bonding protocols
Module 8: Impression and retraction techniques.
Here you can watch a five-minute fragment of the lesson.
The aim of this online master-class is to teach you and show 3 main impression techniques and retraction procedures to get good results.
Key words:
Key words:
- One step impression
- Retraction cords
- Two step technique
- PVS / A-silicone
- Hybrid technique
Module 9: Preparation for full crowns: posteriors.
Here you can watch a five-minute fragment of the lesson.
The full process of preparations for different metal-free crowns will be demonstrated step by step.
Key words:
Key words:
- 3/4 crowns
- Ceramic crowns
- Zirconia crowns
- Working with mirror
Module 10: RUBBERDAMology: basics, tips and tricks with isolation.
Here you can watch a five-minute fragment of the lesson.
This time we present you webinar with online master-class elements dedicated to rubberdam isolation in operative dentistry.
1 lesson.
1 lesson.
Module 11: Veneers and caries defects class 4 and 5.
Here you can watch a five-minute fragment of the lesson.
This time during our specialized online master-class we will show and teach you step by step tooth preparation for ceramic veneers considering class 4 and 5 caries defects.
Key moments:
Key moments:
- Tips and tricks with IDS and cavity design optimization
- Strategies of veneer preparation when caries class 4 and 5 present
- How to define finish line if there is cervical lesion
- Tips and tricks with IDS and cavity design optimization
- Step-by-step live performance
Module 12: Veneers and discoloration.
Here you can watch a five-minute fragment of the lesson.
This time during our specialized online master-class we will show and teach you step by step tooth preparation for ceramic veneers in case of discoloration and color change.
All the process will be broadcasted via 3 cameras to create presence effect.
Key words:
All the process will be broadcasted via 3 cameras to create presence effect.
Key words:
- Ceramic systems
- Preparation volume
- Mockup, Finish lines
- Masking of transitions
- Step-by-step demonstrations
- 90% practice, 10% theory
Module 13: Veneers on premolars and molars.
Here you can watch a five-minute fragment of the lesson.
During this online master-class you will see practical and easy going techniques of 3 different types veneer preparations for molar and premolar teeth as well as indications for each of them.
Key moments:
Key moments:
- Indications for veneer restorations in posterior zone
- Different design of preparation
- Occlusal surface in posterior veneer cases
Special offer
Maxim Belograd
Online school of orthopedic dentistry
20 lessons • 28h 7min
Access to the course is unlimited in time!
Online school of orthopedic dentistry
20 lessons • 28h 7min
Access to the course is unlimited in time!
Maxim Belograd
Dr.
Maxim Belograd is the founder of BELOGRAD Academy. He is one of the most well-known international lecturers and trainers in a field of advanced microscope, esthetic, restorative dentistry and endodontics.
He visited more than 40 countries with practical courses and lectures as speaker, and doctors from more than 70 countries took part in the BeloGrad Academy project.
Maxim Belograd is the first lecturer from the CIS who provided courses on 5 continents and successfully presented his educational programs.
Lectures and presentations were conducted during prestigious dental congresses and conferences as well as individual «solo» formats with attendance from 100 to 3000 participants. Hands-on sessions were provided in certified BG training centers all over the world.
He visited more than 40 countries with practical courses and lectures as speaker, and doctors from more than 70 countries took part in the BeloGrad Academy project.
Maxim Belograd is the first lecturer from the CIS who provided courses on 5 continents and successfully presented his educational programs.
Lectures and presentations were conducted during prestigious dental congresses and conferences as well as individual «solo» formats with attendance from 100 to 3000 participants. Hands-on sessions were provided in certified BG training centers all over the world.