Online course
Zero Bone Loss Concepts - How to develop and maintain crestal bone stability
by Dr. Tomas Linkevicius
- Dr. Tomas Linkevicius
- 13 lessons
- Duration:
15 h - Access to the course is not limited in time
Course program
Zero Bone Loss Concepts - How to develop and maintain crestal bone stability
13 online lessons
How to develop and maintain crestal bone stability?
DEVELOP CRESTAL BONE STABILITY WITH YOUR IMPLANT!
• Demystification of crestal bone stability factors
• Give-up the idea, that bone loss is unavoidable
• Remineralisation of the bone, when bone loss is already present
• Formation of biological protection with prosthetics
• Establishment of the surface with self-cleaning “Lotus” effect
• Prevention – the best treatment of peri-implantitis…and much more!
What to expect from Online course?
My name is Prof. Tomas Linkevicius and I am excited to welcome you to the online course of Zero bone loss concepts. When I created Zero bone loss concepts, my major concern was - what to do, that these ideas would reach as much clinicians, as possible. Apparently, online education is the best way to do it. I wanted, that this online course would be interactive and similar to real live courses I’m giving all over the world. Therefore, this will be 13 lessons program, which will cover all aspects of Zero bone loss concepts.
13 online lessons
How to develop and maintain crestal bone stability?
DEVELOP CRESTAL BONE STABILITY WITH YOUR IMPLANT!
• Demystification of crestal bone stability factors
• Give-up the idea, that bone loss is unavoidable
• Remineralisation of the bone, when bone loss is already present
• Formation of biological protection with prosthetics
• Establishment of the surface with self-cleaning “Lotus” effect
• Prevention – the best treatment of peri-implantitis…and much more!
What to expect from Online course?
My name is Prof. Tomas Linkevicius and I am excited to welcome you to the online course of Zero bone loss concepts. When I created Zero bone loss concepts, my major concern was - what to do, that these ideas would reach as much clinicians, as possible. Apparently, online education is the best way to do it. I wanted, that this online course would be interactive and similar to real live courses I’m giving all over the world. Therefore, this will be 13 lessons program, which will cover all aspects of Zero bone loss concepts.
1.Zero bone loss concepts – harmony of biology and implant design factors
1 h 34 min
2.How to place implants according to Zero bone loss concepts philosophy?
45 min
3.Increasing vertical soft tissue thickness. Subcrestal implant placement
1 h 37 min
4.Flattening of the bone and tent-pole technique
1 h 8 min
5.Vertical soft tissue augmentation with various soft tissues grafts
1 h 8 min
6.How to make safe cemented restorations?
1 h 59 min
7.Screw-retained Ti-base restorations. Single, angulated, FPDs and full-arch
1 h 41 min
8.Important aspects of retentive and gingival parts of Ti-bases
54 min
9.Subgingival materials – zirconia, lithium disilicate, porcelain or other?
2 h 13 min
10.Supragingival materials for implant restorations
40 min
11.Surgical hands-ons. Vertical soft tissue thickening methods
35 min
12.Prosthetic hands-ons. Bite registration material to increase transfer stability
17 min
13.Zero bone Loss concept applied to matrix®
25 min
- 13lessons
- -94%discount
- $471savings
The full course program
1. Zero bone loss concepts - harmony of biology and implant design factors
Here you can watch a five-minute fragment of the lesson.
Introduction to Zero bone loss concepts begins from discussion of various crestal bone reactions to implants – from resorption to vertical growth. The influence of vertical soft tissue thickness is presented in harmony with important implant design factors. It has been shown that at least 3 mm of vertical soft tissue thickness is required to satisfy biological necessity. In conclusion, there is no “the most important factor” to ensure crestal bone stability, it is the combination and interaction of many factors that determine the outcome. Only through accepting this multifactorial reality, clinicians can change their thinking and begin their path to zero bone loss.
Duration: 1 h 34 min
Duration: 1 h 34 min
2. How to place implants according to Zero bone loss concepts philosophy?
Here you can watch a five-minute fragment of the lesson.
It has been suggested in the literature that implant position in relation to bone level might influence bone stability. Therefore, depending on its’ design, implant placement can be supracrestal, crestal or subcrestal. Only if implant is placed according to its design in appropriate position, surgical bone stability will be achieved. It is interesting to note, that not all implants can be placed subcrestally. In addition, implant-abutment connection stability becomes very important, if located subcrestally.
Duration: 45 min
Duration: 45 min
3. Increasing vertical soft tissue thickness. Subcrestal implant placement
Here you can watch a five-minute fragment of the lesson.
It is suggested that thin tissues might be thickened during implant placement, thus reducing bone resorption. Special guidelines how to work in vertical thin mucosal tissues are necessary, usually starting from subcrestal implant placement. Subcrestal implant position is suggested to cause controlled bone remodeling, but not bone loss, if special requirements are met. The depth of implant placement may depend on various factors – implant/abutment connection stability, absence or presence of platform switching and other. Finally, unique immediate transmucosal multiunit (stay-in abutment), which enables “1 abutment-1 time” theory in practice can be used.
Duration: 1 h 37 min
Duration: 1 h 37 min
4. Flattening of the bone and tent-pole technique
Here you can watch a five-minute fragment of the lesson.
Another option to increase soft tissues vertically, might be recontouring of the bone during basic implant bed preparation, especially if narrow ridge is present. Careful reduction and smoothening of the narrow ridge not only will provide a flat bone surface and enlarged platform area of bone for implant positioning, but also would increase soft tissue thickness as well. The third possibility to augment the tissues vertically is “tent-pole” technique, however there are some limitations, which should be considered, before undertaking this procedure.
Duration: 1 h 8 min
Duration: 1 h 8 min
5. Vertical soft tissue augmentation with soft tissue grafts
Here you can watch a five-minute fragment of the lesson.
If bone height is not sufficient for subcrestal implant placement, vertical augmentation of the soft tissue is recommended with different soft tissues grafts - autografts, xenografts or allografts. Procedures can be performed both in single or 2-stage approaches, depending on primary implant stability and nature of the augmentation material. Autografts produce significant soft tissue increase, however harvesting is difficult, also some studies indicate crestal bone loss after going autogenous. Collagen-matrix xenografts result in less boost of volume, since some shrinking is likely to occur, however bone stability is improved. Up to 6 years follow-up results are here.
Duration: 1 h 8 min
Duration: 1 h 8 min
6. How to make safe cemented restorations?
Here you can watch a five-minute fragment of the lesson.
Current recommendations allow clinicians to place cementation margins up to 2 mm subgingivally. Recent research has proved that the deeper the position of the margin, the greater amount of residual cement is left undetected. Cement remnants should be considered as a predisposing factor in development of chronic peri-implant disease. The relation between position of cement excess in the peri-implant sulcus, periodontal status of the patient and severity of peri-implant disease is explained. Lecture summarizes how to control cement remnants after cementation, by using supragingival margins and individual abutments.
Duration: 1 h 59 min
Duration: 1 h 59 min
7. Screw-retained Ti-base restorations. Single, angulated, FPDs and full-arch.
Here you can watch a five-minute fragment of the lesson.
Titanium base abutments, better known, as Ti-bases, form the foundation of prosthetic rehabilitation in Prosthetic Part of Zero bone loss concepts. To avoid cement excess, finished implant restoration with occlusal opening is cemented on titanium base in laboratory and restoration is attached to the implant intraorally by an abutment screw. Engaging and non-engaging versions should be used accordingly to situation, even poorly positioned implants now can be restored with angulated screw-retained solutions. And indeed, screw-retained Ti-base supported solutions can cover all aspects of implant restorations - single, angulated, FPDs and full-arch.
Duration: 1 h 41 min
Duration: 1 h 41 min
8. Important aspects of retentive and gingival parts of Ti-bases.
Here you can watch a five-minute fragment of the lesson.
Titanium bases do possess important aspects in their design. Namely, gingival height and retentive height. Although, they seem similar, yet are different. Gingival height of Ti-base directly influences crestal bone stability, forming the part of the emergence profile of the restoration. It is important, that implant system would have Ti-bases with different gingival heights in their portfolio. Retentive part is important for retention of the finished restoration and must be sufficient to avoid decementation. The issue of sandblasting of titanium bases before cementation is discussed profoundly and recommendations provided.
Duration: 54 min
Duration: 54 min
9. Subgingival materials – zirconia, lithium disilicate, porcelain or other?
Here you can watch a five-minute fragment of the lesson.
Zirconium as a material is considered to be one of the best for peri-implant soft tissues. However, it is evident that it must be treated in special manner – to be polished to a certain extent. So clear polishing protocol must be created, that this procedure would be under control. It is important not to make “Zr without Zr” restorations, when veneering porcelain covers zirconia in subgingival zone of the restoration and does not allow the direct contact between soft tissues and zirconium. In that way the biocompatibility effect might be reduced. Other materials, like polished or glazed lithium disilicate, titanium and feldspathic porcelain are discussed as well.
Duration: 2 h 13 min
Duration: 2 h 13 min
10. Supragingival materials for implant restorations
Here you can watch a five-minute fragment of the lesson.
Not only biological, but also technical requirements are important for successful outcome of the treatment. Several restorative materials are available for supragingival part of implant restorations, like anatomical zirconia, lithium disilicate or veneering porcelain. All of them have advantages and disadvantages, which are broadly analyzed. A special technique, which combines fusing of zirconia framework with lithium disilicate will be presented, where zirconia is designed to have contact with soft peri-implant tissues for adhesion and monolithic ceramics is responsible for subtle restorative strength for occlusion.
Duration: 40 min
Duration: 40 min
11. Surgical hands-ons. Vertical soft tissue thickening methods
Here you can watch a five-minute fragment of the lesson.
Step-by-step high quality videos in a pig model show all 4 methods of vertical soft tissue thickening, according to Puisys & Linkevicius (2015) algorithm. Subcrestal implant placement, using 5 mm healing abutment or stay-in abutment for “1 abutment-1 time” concept is demonstrated, along with vertical soft tissue thickening using soft tissue grafts. Practical demonstration is ended with tent-pole method, which includes positioning of 2 mm healing abutment and presentation of special suturing approach, comprised of deep matrix and single interrupted sutures.
Duration: 35 min
Duration: 35 min
12. Prosthetic hands-ons. Bite registration material to increase transfer stability
Here you can watch a five-minute fragment of the lesson.
Deep position of the implant results in condition, when stability of open tray transfer might be reduced, due to lack of the contact between transfer and impression material. This might lead to less accurate model and subsequently, restoration. A method, suggested by prof. T. Linkevicius (2012) is aimed directly to solve this situation, when slow-setting occlusal registration material is used together with conventional impression silicones to increase open tray coping stability.
Duration: 17 min
Duration: 17 min
13.Zero bone Loss concept applied to matrix®
Here you can watch a five-minute fragment of the lesson.
Duration: 25 min
Special offer
Tomas Linkevicius
Zero Bone Loss Concepts - How to develop and maintain crestal bone stability
13 lessons • 15 h
Access to the course is unlimited in time!
Zero Bone Loss Concepts - How to develop and maintain crestal bone stability
13 lessons • 15 h
Access to the course is unlimited in time!
Tomas Linkevicius
Dr
Dr
Dr. Tomas Linkevicius serves as Professor in Institute of Odontology, Vilnius University in Lithuania. Also he works as Visiting Professor in Ghent University, Belgium. He received a dental degree in Kaunas Medical University in 2000. Tomas Linkevicius is an author of many publications in international peer-reviewed journals and focuses his research on soft tissues and cementation of implant restorations.
Professor Linkevicius has developed “Zero bone loss concepts”, a scientifically backed clinical protocol, which shows how to archive and maintain crestal bone stability around implants. He also lectures internationally and is an active member of European Academy of Osseointegration (EAO) and Academy of Osseointegration (AO). Tomas Linkevicius holds a specialist prosthodontics and implant dentistry practice and a private dental research facility.
Professor Linkevicius has developed “Zero bone loss concepts”, a scientifically backed clinical protocol, which shows how to archive and maintain crestal bone stability around implants. He also lectures internationally and is an active member of European Academy of Osseointegration (EAO) and Academy of Osseointegration (AO). Tomas Linkevicius holds a specialist prosthodontics and implant dentistry practice and a private dental research facility.